PS2801-1-V-F3-A footprint, schematic symbol and 3D model by Renesas Electronics

Symbol

PCB Footprints

PS2801-1-V-F3-A Details

A 4-layer PCB with a solid ground plane and a separate power plane is recommended. Keep the input and output traces short and away from noise sources. Use a common mode choke or ferrite bead to filter out high-frequency noise.
Use a 10uF ceramic capacitor and a 1uF ceramic capacitor in parallel, placed as close as possible to the VIN pin. Add a 10nF ceramic capacitor between the VIN and GND pins for high-frequency decoupling.
The maximum ambient temperature for reliable operation is 85°C. However, it's recommended to derate the device by 1°C for every 1,000 feet of altitude above sea level.
Yes, but ensure the device is properly secured to the PCB using a suitable adhesive or mechanical fastening method. Apply a conformal coating to protect the device from moisture and contaminants.
Use an oscilloscope to monitor the input and output voltages, and check for signs of overheating, noise, or oscillation. Verify the PCB layout and component placement, and ensure proper decoupling and filtering.

Manufacturer Collaborated

System Verified

Community Approved

Use the download button to access the PS2801-1-V-F3-A schematic symbol and PCB footprint.

To find more CAD model downloads similar to this part, try a partial part number search, like PS280, or try a keyword search, such as Optocoupler

If you searched for PS2801-1-V-F3-A, you might also be interested in these parts:

Showing 0 results


Please enter a minimum 3 letters or numbers
← Prev Next →