PS2811-1-M-A footprint, schematic symbol and 3D model by Renesas Electronics

Symbol

PCB Footprints

3D Models

PS2811-1-M-A Details

A 4-layer PCB with a solid ground plane and a separate power plane is recommended. Keep the analog and digital sections separate, and use a common ground point for the analog and digital grounds.
Use a metal shield around the device, and ensure a good ground connection. Keep the device away from high-frequency sources, and use a common mode choke or ferrite bead to filter out noise.
Power up the device in the following sequence: VCC, AVCC, and then the input voltage. Ensure a monotonic power-up sequence to prevent latch-up.
Use a heat sink with a thermal conductivity of at least 1 W/m-K. Ensure good airflow around the device, and avoid blocking the thermal pads. Use thermal interface material (TIM) for better heat transfer.
The recommended input voltage range is 2.7V to 5.5V. Operating outside this range may affect the device's performance and reliability.

Community Provided

System Verified

Community Approved

Use the download button to access the PS2811-1-M-A schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like PS281, or try a keyword search, such as Optocoupler

Showing 0 results


Please enter a minimum 3 letters or numbers
← Prev Next →