PS2915-1-F3-AX footprint, schematic symbol and 3D model by Renesas Electronics

Symbol

PCB Footprints

3D Models

PS2915-1-F3-AX Details

A 4-layer PCB with a solid ground plane and a separate power plane is recommended. Keep the analog and digital sections separate, and use a common ground point for the analog and digital grounds.
Use a metal shield or a shielded enclosure to reduce electromagnetic radiation. Ensure proper grounding, and use a common mode choke or a ferrite bead to filter out high-frequency noise.
Power up the VCC pin first, followed by the VDD pin. Ensure that the VCC pin reaches its nominal voltage before applying power to the VDD pin.
Use a heat sink or a thermal pad to dissipate heat. Ensure good airflow around the device, and avoid blocking the airflow with nearby components.
Route the clock signal as a differential pair, using a controlled impedance transmission line. Keep the clock signal traces short and away from noisy signals.

Manufacturer Collaborated

System Verified

Community Approved

Use the download button to access the PS2915-1-F3-AX schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like PS291, or try a keyword search, such as Optocoupler

If you searched for PS2915-1-F3-AX, you might also be interested in these parts:

Showing 0 results


Please enter a minimum 3 letters or numbers
← Prev Next →