PS9113-AX footprint, schematic symbol and 3D model by Renesas Electronics

Symbol

PCB Footprints

3D Models

PS9113-AX Details

A 4-layer PCB with a solid ground plane and a separate power plane is recommended. Keep the analog and digital signal traces separate and avoid crossing them over each other.
Use a high-quality decoupling capacitor (e.g., 10uF) close to the VCC pin, and ensure the power supply is stable and noise-free. Add a 10nF capacitor between VCC and GND for additional filtering.
The recommended clock frequency is 24MHz, but it can operate up to 32MHz. Ensure the clock signal is stable and has minimal jitter for optimal performance.
Use the Power-Down mode (PD) to reduce power consumption. Set the PD pin high to enter low-power mode. You can also adjust the clock frequency and voltage regulator settings to minimize power consumption.
The maximum data transfer rate is 100Mbps. However, the actual data transfer rate may vary depending on the system configuration and operating conditions.

Manufacturer Collaborated

System Verified

Community Approved

Use the download button to access the PS9113-AX schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like PS911, or try a keyword search, such as Optocoupler

Showing 0 results


Please enter a minimum 3 letters or numbers
← Prev Next →