PS9123-F3-AX footprint, schematic symbol and 3D model by Renesas Electronics

Symbol

PCB Footprints

PS9123-F3-AX Details

A 4-layer PCB with a dedicated ground plane and thermal vias is recommended. Ensure a minimum of 1mm clearance around the device for airflow and heat dissipation.
Use a common clock source, ensure signal integrity by minimizing noise and jitter, and implement error detection and correction mechanisms such as CRC and checksums.
Power up the device in the following sequence: VCC, AVCC, and then DVCC. Ensure a minimum of 10ms delay between each power-up step.
Use the PDN pin to initiate power-down. Ensure all inputs are at a valid logic level, and wait for at least 10us after power-down before re-applying power.
Use ESD protection devices such as TVS diodes or ESD arrays on all input/output pins. Ensure the protection devices are rated for the maximum voltage and current of the application.

Manufacturer Collaborated

System Verified

Community Approved

Use the download button to access the PS9123-F3-AX schematic symbol and PCB footprint.

To find more CAD model downloads similar to this part, try a partial part number search, like PS912, or try a keyword search, such as Optocoupler

Showing 0 results

Image	Part Number	Model
	PS9123-V-F3-AX Renesas Electronics Corporation Logic IC Output Optocoupler, 1-Channel, 1-Element, 3750V Isolation, 15MBps
	PS9123 Renesas Electronics Corporation Logic IC Output Optocoupler, 1-Channel, 1-Element, 3750V Isolation, 10MBps
For a full list of alternate parts for PS9123-F3-AX, check out Findchips.com


Please enter a minimum 3 letters or numbers
← Prev Next →