Description:The PS9513, PS9513L1, PS9513L2 and PS9513L3 are optically coupled isolators containing an AlGaAs LED on the input side and a photo diode and a signal processing circuit on the output side on one chip. The PS9513 is designed specifically for high common mode transient immunity (CMR) and low pulse width distortion with operating temperature. It is suitable for IPM drive. The PS9513L1 is lead bending type for long creepage distance. The PS9513L2 is lead bending type for long creepage distance (Gull-wing) for s
Renesas provides a recommended PCB layout guide in their application note (APN) document, which includes guidelines for component placement, routing, and thermal management to ensure optimal performance and minimize noise.
The PS9513L2-AX has a built-in overcurrent protection feature, but it requires external resistors to set the current limit. Renesas provides a calculation formula in the datasheet to determine the required resistor values based on the desired current limit.
The maximum cable length supported by the PS9513L2-AX depends on the specific application and the type of cable used. As a general guideline, Renesas recommends keeping the cable length below 3 meters to ensure reliable operation. However, longer cable lengths may be possible with proper signal conditioning and termination.
Renesas provides a troubleshooting guide in their application note (APN) document, which includes a step-by-step procedure to identify and resolve common issues, such as power-on reset, clock signal integrity, and data transmission errors.
The PS9513L2-AX has a maximum junction temperature of 125°C. To ensure reliable operation, Renesas recommends implementing thermal management techniques, such as heat sinks, thermal vias, and airflow management, to keep the device temperature below 85°C.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
PS9513L2-AX Overview
Use the download button to access the PS9513L2-AX schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like PS951,
or try a keyword search, such as Optocoupler
