Bourns recommends a symmetrical PCB layout with a solid ground plane, and keeping the input and output traces as short as possible to minimize inductance and noise. A 4-layer PCB with a dedicated power plane is also recommended.
To ensure reliability, follow the recommended derating curves for temperature and power dissipation. Also, ensure good thermal management by providing adequate heat sinking and airflow around the device. Consider using a thermal interface material to improve heat transfer.
The maximum allowable voltage transient for the PV37W101C01B00 is 10% above the maximum rated voltage (37V) for a duration of 100ms. Exceeding this limit may damage the device.
Yes, the PV37W101C01B00 is suitable for switching power supply applications. However, ensure that the device is properly bypassed with capacitors to minimize voltage ringing and noise. Also, follow the recommended layout and grounding practices to minimize EMI.
The ESR of the PV37W101C01B00 is typically around 1.5 ohms. This value can be used for impedance calculations and filter design.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
PV37W101C01B00 Overview
Use the download button to access the PV37W101C01B00 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like PV37W,
or try a keyword search, such as Variable Resistors
