Bourns recommends a PCB layout with a solid ground plane, short and wide traces, and a decoupling capacitor (e.g., 10nF) between the input and output pins to minimize noise and ensure stability.
To ensure reliability in high-temperature applications, follow the recommended derating curves, ensure good thermal management (e.g., heat sinks, thermal pads), and consider using a thermally conductive adhesive or thermal interface material.
Yes, PWR163S-25-R100F can be used in switching regulator applications, but ensure that the output capacitor is properly sized to handle the high-frequency switching noise, and consider adding a snubber circuit to reduce ringing.
The maximum allowed voltage drop across the PWR163S-25-R100F is 25V, as specified in the datasheet. Exceeding this voltage drop may lead to reduced performance, increased power dissipation, or even damage to the device.
To troubleshoot issues with PWR163S-25-R100F, check the input voltage, output current, and PCB layout for any errors or omissions. Use a thermal camera or thermometer to check for overheating, and verify that the output capacitor is properly sized and connected.
Trust Checks
This model has been provided by an expert contributor.
Expert Contribution
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
PWR163S-25-R100F Overview
Use the download button to access the PWR163S-25-R100F schematic symbol and PCB footprint.
To find more CAD model downloads similar to this part, try a partial part number search, like PWR16,
or try a keyword search, such as Metal Glaze/Thick Film Resistors
