Bourns recommends a PCB layout with a solid ground plane, short and wide traces, and a decoupling capacitor (e.g., 10nF) between the input and output pins to minimize noise and ensure stability.
Use a soldering iron with a temperature of 250°C to 260°C, and apply a small amount of solder to the pads. Ensure the inductor is centered and evenly spaced on the pads, and avoid applying excessive force or pressure during soldering.
The PWR220T-35-4700J is rated for operation from -40°C to +125°C, but derating may be necessary for high-temperature applications. Consult the datasheet for specific derating curves.
Yes, the PWR220T-35-4700J is designed to withstand vibrations up to 10G, but it's essential to ensure proper PCB mounting and secure the inductor to the board using a suitable adhesive or mechanical fastening method.
Use proper shielding, grounding, and layout techniques to minimize EMI and RFI emissions. Consider adding a shield can or a metal enclosure around the inductor, and ensure the PCB layout is designed to minimize radiation.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
PWR220T-35-4700J Overview
Use the download button to access the PWR220T-35-4700J schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like PWR22,
or try a keyword search, such as Metal Glaze/Thick Film Resistors
