SINGLE WITH BUILT-IN TRIGGER ELEMENT IN SERIES WITH GATE
Critical Rate of Rise of Commutation Voltage-Min:
3 V/us
Critical Rate of Rise of Off-State Voltage-Min:
20 V/us
Holding Current-Max:
50 mA
JEDEC-95 Code:
TO-220AB
JESD-30 Code:
R-PSFM-T3
JESD-609 Code:
e3
Leakage Current-Max:
2 mA
Moisture Sensitivity Level:
2
Number of Elements:
1
Number of Terminals:
3
Operating Temperature-Max:
125 °C
Operating Temperature-Min:
-40 °C
Package Body Material:
PLASTIC/EPOXY
Package Shape:
RECTANGULAR
Package Style:
FLANGE MOUNT
Peak Reflow Temperature (Cel):
260
Qualification Status:
Not Qualified
RMS On-state Current-Max:
10 A
Repetitive Peak Off-state Voltage:
600 V
Surface Mount:
NO
Terminal Finish:
Matte Tin (Sn)
Terminal Form:
THROUGH-HOLE
Terminal Position:
SINGLE
Time@Peak Reflow Temperature-Max (s):
40
Trigger Device Type:
TRIAC WITH INT TRIGGER
Q6010LT Frequently Asked Questions (FAQs)
The recommended PCB layout for the Q6010LT involves keeping the input and output traces as short as possible, using a solid ground plane, and placing the device close to the power source to minimize inductance. Additionally, it's recommended to use a 4-layer PCB with a dedicated power plane and a dedicated ground plane.
To ensure proper soldering of the Q6010LT, use a soldering iron with a temperature of 250°C to 260°C, and apply a small amount of solder paste to the pads. Use a reflow oven or a hot air gun to solder the device, and avoid applying excessive force or pressure to the device during the soldering process.
The maximum operating temperature range for the Q6010LT is -40°C to 150°C, with a derating of 1.33% per °C above 125°C. However, it's recommended to operate the device within a temperature range of -20°C to 100°C for optimal performance and reliability.
Yes, the Q6010LT is designed to withstand high-vibration environments. It has a vibration rating of 10G peak acceleration, 10-2000 Hz frequency range, and 1 hour duration. However, it's recommended to follow proper PCB design and assembly guidelines to ensure the device is securely attached to the PCB and can withstand the vibration.
To troubleshoot issues with the Q6010LT, start by checking the input voltage and current, and ensure that they are within the recommended operating range. Check for any signs of overheating, such as excessive temperature or burning smells. Use an oscilloscope to check the output voltage and current waveforms, and verify that they are within the expected range. If the issue persists, consult the datasheet and application notes for further guidance.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
Q6010LT Overview
Use the download button to access the Q6010LT 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like Q6010,
or try a keyword search, such as TRIACs
