RECOM recommends a PCB layout with a large copper area connected to the tab of the R-78E9.0-0.5 to dissipate heat efficiently. A minimum of 1 square inch of copper area is recommended.
RECOM recommends using a soldering iron with a temperature of 250°C to 270°C and a solder with a melting point of 180°C to 200°C. Apply a small amount of solder to the PCB pads and component leads, and use a soldering iron to melt the solder.
The maximum ambient temperature for the R-78E9.0-0.5 is 40°C, with a derating of 1.5% per °C above 30°C.
Yes, the R-78E9.0-0.5 is designed to withstand high-vibration environments. However, it's recommended to secure the module to the PCB using screws or adhesive to prevent movement during operation.
RECOM recommends using an input capacitor with a value of 10uF to 22uF, with a voltage rating of 50V or higher, to ensure stable operation and minimize input ripple.
Trust Checks
This model has been provided by an expert contributor.
Expert Contribution
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
R-78E9.0-0.5 Overview
Use the download button to access the R-78E9.0-0.5 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like R-78E,
or try a keyword search, such as Power Supply Modules