RECOM recommends a PCB layout with a large copper area connected to the module's thermal pad to ensure good heat dissipation. A minimum of 2 oz copper thickness is recommended, and the copper area should be connected to a heat sink or a metal plate for further heat dissipation.
To ensure reliability in high-temperature environments, it's essential to follow RECOM's derating guidelines, which can be found in the datasheet. Additionally, consider using a heat sink or a metal plate to dissipate heat, and ensure good airflow around the module.
The maximum allowed capacitance for the output filter capacitor is not explicitly stated in the datasheet. However, as a general rule, RECOM recommends keeping the output capacitance below 10uF to avoid stability issues. It's essential to consult with RECOM's application engineers for specific guidance on output filter design.
Yes, the R12P212D/R6.4 can be used in a redundant configuration. However, it's crucial to ensure that the modules are properly synchronized and that the output voltages are matched to avoid any potential issues. Consult with RECOM's application engineers for guidance on implementing a redundant configuration.
The recommended input fuse rating for the R12P212D/R6.4 is typically 2-3 times the maximum input current rating of the module. For the R12P212D/R6.4, the maximum input current rating is 1.2A, so a fuse rating of 2.4-3.6A would be suitable. However, the exact fuse rating may vary depending on the specific application and requirements.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
R12P212D/R6.4 Overview
Use the download button to access the R12P212D/R6.4 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like R12P2,
or try a keyword search, such as Power Supply Modules
