RECOM recommends a PCB layout with a large copper area for heat dissipation, and a thermal interface material (TIM) with a thermal conductivity of at least 1 W/mK. A minimum of 2 oz copper thickness is recommended. For more information, refer to the RECOM application note AN-103.
Yes, the R15P215S/P/X2 is designed to withstand high vibrations. It meets the IEC 60068-2-6 standard for vibration resistance, with a test duration of 1 hour per axis (x, y, z) at 10-2000 Hz, 10 G peak acceleration.
To ensure EMC, RECOM recommends using a shielded enclosure, keeping the input and output cables as short as possible, and using a common-mode choke on the input lines. Additionally, the R15P215S/P/X2 has built-in EMI filters to reduce electromagnetic interference.
The maximum allowed capacitance on the output of the R15P215S/P/X2 is 2200 μF. Exceeding this value may affect the stability of the converter.
Yes, the R15P215S/P/X2 can be used in a redundant configuration. However, it's essential to ensure that the modules are synchronized to prevent oscillations and instability. RECOM recommends using a synchronization signal and a diode ORing circuit to connect the outputs.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
R15P215S/P/X2 Overview
Use the download button to access the R15P215S/P/X2 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like R15P2,
or try a keyword search
