Description:The R2A20169 is an integrated circuit semiconductor of CMOS structure with 12 channels of built in D/Aunnecessary and enabling configuration of a system with few component parts. Serial data transfer type input can easily be used through a combination of three lines: DI, CLK, and LD. Outputs incorporate buffer op-amps that have a drive capacity of 1 mA or above for both sink source, and can operate over the entire voltage range from almost ground to Vcc ( 0 to 5V ), making peripheral elements unnecessary an
Renesas provides a recommended PCB layout guide in their application notes (e.g., AN1841) and evaluation board documentation. It's essential to follow these guidelines to ensure proper thermal management, signal integrity, and power supply decoupling.
The R2A20169NP#W5 has built-in POR and BOD circuits. To implement them correctly, ensure that the power supply voltage (VCC) is stable and within the recommended range. Also, use an external capacitor (e.g., 10nF) between the VCC pin and the GND pin to filter out noise and ensure proper POR and BOD operation.
The maximum allowed clock frequency for the R2A20169NP#W5 is 32 MHz. However, the actual achievable frequency may vary depending on the system design, PCB layout, and clock signal quality. It's recommended to consult the datasheet and application notes for specific guidance on clock frequency selection.
The WDT can be configured using the watchdog timer control register (WTCR). Set the WDT timeout period according to your system's requirements, and ensure that the WDT is periodically reset or refreshed to prevent system reset. Consult the datasheet and application notes for detailed configuration and usage guidelines.
The R2A20169NP#W5 has a maximum junction temperature (TJ) of 150°C. To ensure proper thermal management, use a heat sink or thermal pad, and follow Renesas' recommended thermal design guidelines. Also, consider using a thermal interface material (TIM) to improve heat transfer between the device and the heat sink or PCB.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
R2A20169NP#W5 Overview
Use the download button to access the R2A20169NP#W5 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like R2A20,
or try a keyword search, such as Digital to Analog Converters
