Please enter a minimum 3 letters or numbers
Technical Content
Part Image

R5F5630EDDFP#10 - Renesas Electronics

Description: With flash memory capacities from small to large and package pin counts from low to high, the RX630 Group can satisfy the demands of a variety of embedded devices. All the products of the RX630 Group are equipped with E2 data flash capable of 100, 000 rewrites and enhanced peripheral functions with increased numbers of channels including timers, USB 2.0 function module, serial communication interface, I2C bus interface, CAN, 10-bit and 12-bit A/D converter, and 10-bit D/A converter. In particular, built-in

Download R5F5630EDDFP#10 Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
R5F5630EDDFP#10 - Renesas Electronics - PCB symbol
click to zoom
PCB Footprints
R5F5630EDDFP#10 - Renesas Electronics PCB footprint - Quad Flat Packages - Quad Flat Packages - PLQP0100KB-A
click to zoom
3D Models
R5F5630EDDFP#10 - Renesas Electronics - 3D model - Quad Flat Packages - PLQP0100KB-A
click to zoom

R5F5630EDDFP#10 Details

  • Manufacturer Part Number:

    R5F5630EDDFP#10

  • Brand Name:

    Renesas

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Not Recommended

  • Part Package Code:

    LQFP

  • Pin Count:

    100

  • Manufacturer Package Code:

    PLQP0100KB

  • HTS Code:

    8542.31.00.30

  • Factory Lead Time:

    12 Weeks

  • Manufacturer:

    Renesas Electronics Corporation

  • YTEOL:

    3

  • Moisture Sensitivity Level:

    3

  • uPs/uCs/Peripheral ICs Type:

    MICROCONTROLLER

R5F5630EDDFP#10 Frequently Asked Questions (FAQs)

  • The recommended power-on sequence is to apply VCC first, followed by VCCPLL, and then the clock signal. This ensures proper initialization of the internal PLL and clock domains.
  • The clock settings can be configured through the Clock Control Register (CCR) and the PLL Control Register (PLLCR). Refer to the datasheet for the specific register addresses and bit settings.
  • The maximum operating frequency of the R5F5630EDDFP#10 is 240 MHz, but this can be adjusted through the clock control registers to optimize power consumption and performance.
  • The R5F5630EDDFP#10 has a built-in watchdog timer (WDT) that can be enabled and configured through the Watchdog Timer Control Register (WDTCR). The WDT can be used to reset the device in case of a software fault or hang-up.
  • The NMI pin is used to trigger a non-maskable interrupt, which has the highest priority and cannot be masked by software. This is typically used for critical events such as a system reset or a fault detection.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

R5F5630EDDFP#10 Overview

Use the download button to access the R5F5630EDDFP#10 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like R5F56, or try a keyword search, such as Microcontrollers

Parts related to R5F5630EDDFP#10

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑