Part Image

R5F572MNHDFC#30 - Renesas Electronics

Description: The RX72M Group microcontrollers are high performance products operating at 240 MHz with RX's 3rd generation CPU core "RXv3 core". Double-precision floating-point processing instructions can significantly improve processing power. It incorporates an EtherCAT slave controller and realizes a system configuration that requires a dedicated controller on a single chip, contributing to a reduction in the number of parts and space saving.

Download R5F572MNHDFC#30 Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
R5F572MNHDFC#30 - Renesas Electronics PCB footprint - Quad Flat Packages - Quad Flat Packages - 176PIN QFP-+-+
click to zoom
3D Models
R5F572MNHDFC#30 - Renesas Electronics  - 3D model - Quad Flat Packages - 176PIN QFP-+-+
click to zoom

R5F572MNHDFC#30 Details

  • Manufacturer Part Number:

    R5F572MNHDFC#30

  • Brand Name:

    Renesas

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    LQFP

  • Pin Count:

    176

  • Manufacturer Package Code:

    PLQP0176KB

  • HTS Code:

    8542.31.00.25

  • Factory Lead Time:

    12 Weeks

  • Manufacturer:

    Renesas Electronics Corporation

  • YTEOL:

    7.38

  • Has ADC:

    YES

  • Address Bus Width:

    27

  • Bit Size:

    32

  • Clock Frequency-Max:

    24 MHz

  • DMA Channels:

    YES

  • External Data Bus Width:

    32

  • Length:

    24 mm

  • Number of I/O Lines:

    136

  • Number of Terminals:

    176

  • PWM Channels:

    YES

  • Package Code:

    LFQFP

  • Package Shape:

    SQUARE

  • Package Style:

    FLATPACK, LOW PROFILE, FINE PITCH

  • Speed:

    240 MHz

  • Supply Voltage-Max:

    3.6 V

  • Supply Voltage-Min:

    2.7 V

  • Surface Mount:

    YES

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    0.5 mm

  • Terminal Position:

    QUAD

  • Width:

    24 mm

  • uPs/uCs/Peripheral ICs Type:

    MICROCONTROLLER

R5F572MNHDFC#30 Frequently Asked Questions (FAQs)

  • The recommended power-on sequence is to apply VCC first, followed by VCCPLL, and then VCCIO. This ensures that the internal voltage regulators and PLL are properly initialized.
  • The clock settings can be configured using the Clock Control Register (CKCR) and the PLL Control Register (PLLCR). Refer to the user manual for detailed information on clock configuration and settings.
  • The maximum operating frequency of the R5F572MNHDFC#30 is 240 MHz. However, the actual operating frequency may vary depending on the system design and clock configuration.
  • The R5F572MNHDFC#30 has a built-in watchdog timer (WDT) that can be enabled and configured using the Watchdog Timer Control Register (WDTCR). The WDT can be used to reset the device in case of a software or hardware fault.
  • The NMI pin is used to generate a non-maskable interrupt that can be used to handle critical system events, such as a system reset or a fault condition. The NMI pin is connected to the NMI input of the CPU, which triggers an interrupt when the pin is asserted.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

R5F572MNHDFC#30 Overview

Use the download button to access the R5F572MNHDFC#30 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like R5F57, or try a keyword search, such as Microcontrollers

Parts related to R5F572MNHDFC#30

Showing 0 results