Carlo Gavazzi recommends a 4-layer PCB with a solid ground plane and a thermal pad connected to a heat sink or a thermal via to ensure efficient heat dissipation. A minimum of 1 oz copper thickness is recommended for the PCB.
To ensure EMC, Carlo Gavazzi recommends using a shielded enclosure, keeping the RA2450HA06 away from high-frequency sources, and using a common-mode choke or ferrite bead on the input lines. Additionally, follow the recommended PCB layout and grounding scheme.
The maximum allowed voltage drop across the input capacitors is 1.5V. Exceeding this value may affect the performance and reliability of the RA2450HA06.
Yes, the RA2450HA06 can be used in a redundant or parallel configuration, but it requires careful design and implementation to ensure proper synchronization and current sharing. Consult Carlo Gavazzi's application notes or contact their technical support for guidance.
Carlo Gavazzi recommends using a slow-blow fuse with a rating of 5A to 10A, depending on the specific application and input voltage. The fuse should be able to handle the inrush current and provide adequate protection against overcurrent conditions.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
RA2450HA06 Overview
Use the download button to access the RA2450HA06 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like RA245,
or try a keyword search, such as Solid State Relays
