The recommended PCB layout for optimal thermal performance involves placing the module on a multi-layer PCB with a large copper area for heat dissipation. The copper area should be connected to a solid ground plane to ensure good heat conduction.
To ensure proper soldering, use a soldering iron with a temperature of 250°C to 270°C. Apply a small amount of solder paste to the PCB pads and place the module on top. Use a gentle pressure to ensure good contact. Avoid applying excessive pressure, which can damage the module.
The recommended input capacitor value is 10uF to 22uF, with a voltage rating of 50V or higher. A low-ESR ceramic capacitor, such as X5R or X7R, is recommended for optimal performance.
The RAC05-05SC is rated for operation up to 80°C ambient temperature. However, derating is required for temperatures above 60°C. Consult the datasheet for derating curves and ensure proper heat sinking and airflow to prevent overheating.
Use a fuse or a current-limiting resistor in series with the input to protect against overcurrent. For overvoltage protection, use a voltage regulator or a zener diode to clamp the input voltage to a safe level.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
RAC05-05SC Overview
Use the download button to access the RAC05-05SC 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like RAC05,
or try a keyword search, such as Power Supply Modules
