ROHM recommends a thermal pad size of at least 2.5mm x 2.5mm, with multiple vias to the ground plane to ensure efficient heat dissipation. A minimum of 1oz copper thickness is also recommended.
To ensure reliability, follow the recommended derating curves for temperature and current. Also, consider using a heat sink or thermal interface material to reduce the junction temperature. ROHM also recommends using a fuse or overcurrent protection to prevent damage from excessive current.
The maximum allowed voltage for the RB715FM-40FHT106 is 40V. Exceeding this voltage can lead to reduced reliability and potentially cause damage to the device. ROHM recommends operating the device within the specified voltage range to ensure optimal performance and reliability.
To prevent ESD damage, handle the RB715FM-40FHT106 with anti-static wrist straps, mats, or other ESD protection devices. Ensure that the device is stored in anti-static packaging and follow proper assembly procedures to minimize the risk of ESD damage.
ROHM recommends soldering the RB715FM-40FHT106 using a peak temperature of 260°C (500°F) for 10 seconds or less, with a soldering iron temperature of 350°C (662°F) or less. Use a solder with a melting point of 217°C (423°F) or higher.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
RB715FM-40FHT106 Overview
Use the download button to access the RB715FM-40FHT106 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like RB715,
or try a keyword search, such as Rectifier Diodes
