RECOM Power Inc recommends a PCB layout with a large copper area connected to the module's thermal pad to ensure good heat dissipation. A minimum of 2 oz copper thickness is recommended, and the copper area should be connected to a heat sink or a metal plate for further heat dissipation.
To ensure reliability in high-temperature environments, it is recommended to derate the module's output power according to the temperature derating curve provided in the datasheet. Additionally, ensure good airflow around the module, and consider using a heat sink or a fan to keep the temperature within the recommended operating range.
RECOM Power Inc recommends using a low-ESR ceramic capacitor with a value of 10uF to 22uF, rated for the input voltage range, to filter the input voltage and reduce ripple.
Yes, the RBM-1212D can be used in a redundant configuration to achieve high reliability. However, it is essential to ensure that the modules are properly synchronized and that the output voltages are properly balanced to prevent current imbalances and reduce the risk of failure.
According to RECOM Power Inc, the typical MTBF for the RBM-1212D is >1 million hours, calculated according to MIL-HDBK-217F, at 40°C ambient temperature and 50% load.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
RBM-1212D Overview
Use the download button to access the RBM-1212D 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like RBM-1,
or try a keyword search, such as Power Supply Modules
Suggested Parts
If you searched for RBM-1212D, you might also be interested in these parts:
