RECOM recommends using a low-ESR ceramic capacitor (e.g., X7R or X5R) with a minimum capacitance of 10uF and a voltage rating of 50V or higher, placed as close as possible to the input pins of the module.
Make sure to provide adequate airflow around the module, and consider using a heat sink if the module will be operating in a high-temperature environment. Also, ensure that the module is not exposed to temperatures above 85°C during storage or operation.
The maximum output capacitance is not explicitly stated in the datasheet, but as a general rule, RECOM recommends limiting the output capacitance to 10uF or less to avoid stability issues. However, it's best to consult with RECOM's application engineers for specific guidance on output capacitance selection.
Yes, the REC10-2415D/H3/M can be used in a redundant or parallel configuration, but it's essential to follow RECOM's guidelines for synchronization and current sharing to ensure reliable operation. Consult the RECOM application note AN-103 for more information.
The typical efficiency of the REC10-2415D/H3/M is around 85-90% depending on the input voltage, output voltage, and load conditions. However, the actual efficiency may vary depending on the specific application and operating conditions.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
REC10-2415D/H3/M Overview
Use the download button to access the REC10-2415D/H3/M 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like REC10,
or try a keyword search
