The maximum capacitive load is not explicitly stated in the datasheet, but as a general rule, RECOM recommends limiting the output capacitance to 10-20 times the output capacitance of the converter itself, which is 100nF. Therefore, the maximum capacitive load would be around 1-2uF.
The REC3-2415DRW/H/B has a maximum operating temperature of 85°C, but it can be derated for higher temperatures. RECOM recommends derating the output power by 2.5% per degree above 60°C. However, it's essential to ensure that the converter is properly cooled and that the maximum junction temperature of 125°C is not exceeded.
The REC3-2415DRW/H/B meets various safety certifications, including UL60950-1, EN60950-1, and IEC60950-1. However, to ensure compliance with specific regulations, it's essential to review the certification documents and ensure that the converter is used within its specified operating conditions and parameters.
Yes, the REC3-2415DRW/H/B can be used in a redundant configuration, but it requires additional external circuitry to ensure proper operation. RECOM recommends using a diode or a switch to isolate the outputs of the redundant converters and prevent back-feeding.
The recommended input fuse rating is not explicitly stated in the datasheet, but as a general rule, RECOM recommends using a fuse with a rating of 1-2 times the maximum input current of the converter, which is 1.5A for the REC3-2415DRW/H/B. Therefore, a fuse rating of 1.5-3A would be suitable.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
REC3-2415DRW/H/B Overview
Use the download button to access the REC3-2415DRW/H/B 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like REC3-,
or try a keyword search
