The maximum capacitive load is not explicitly stated in the datasheet, but as a general rule, RECOM recommends limiting the output capacitance to 10-20 times the output capacitance of the converter itself, which is 100nF. So, the maximum capacitive load would be around 1-2uF.
The REC30-2412SZ has a maximum operating temperature of 85°C, but it can be derated for higher temperatures. RECOM recommends derating the output power by 2.5% per degree above 60°C. However, it's essential to ensure that the converter is properly cooled and that the maximum junction temperature of 125°C is not exceeded.
The REC30-2412SZ meets various safety certifications, including UL60950-1, EN60950-1, and IEC60950-1. However, to ensure compliance with specific application requirements, it's essential to review the certification documents and ensure that the converter is used within its specified operating conditions and parameters.
The recommended input capacitor value is 10-22uF, and the type should be a low-ESR capacitor, such as an X7R or X5R ceramic capacitor or a film capacitor. The input capacitor helps to filter the input voltage and reduce ripple.
Yes, the REC30-2412SZ can be paralleled to increase the output power, but it's essential to ensure that the converters are synchronized and that the output voltages are matched. RECOM recommends using a master-slave configuration and connecting the outputs in parallel through a resistive network to balance the output currents.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
REC30-2412SZ Overview
Use the download button to access the REC30-2412SZ 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like REC30,
or try a keyword search, such as Power Supply Modules
