RECOM Power Inc recommends a PCB layout with a large copper area connected to the module's thermal pad to ensure good heat dissipation. A minimum of 2 oz copper thickness is recommended, and the copper area should be connected to a heat sink or a metal plate for further heat dissipation.
Yes, the REM10-2424S/A/CTRL is designed to withstand vibrations up to 10G peak acceleration, making it suitable for use in industrial and transportation applications. However, it's recommended to follow proper mounting and screwing procedures to ensure the module is securely fastened to the PCB or chassis.
The REM10-2424S/A/CTRL has built-in OVP, which can be enabled by connecting the OVP pin to the input voltage rail. When the input voltage exceeds the OVP threshold (typically 12.5V), the module will shut down to protect itself and the load. You can also add an external OVP circuitry if required.
RECOM Power Inc recommends using a low-ESR ceramic capacitor with a value of 10uF to 22uF, rated for the input voltage range (up to 36V). The capacitor should be placed close to the module's input pins to minimize noise and ripple.
Yes, the REM10-2424S/A/CTRL can be used in redundant or parallel configurations to achieve higher power ratings or redundancy. However, it's essential to follow proper design guidelines and ensure that the modules are synchronized and properly connected to avoid any potential issues.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
REM10-2424S/A/CTRL Overview
Use the download button to access the REM10-2424S/A/CTRL 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like REM10,
or try a keyword search
