OVER LOAD; OVER TEMPERATURE; OVER VOLTAGE; SHORT CIRCUIT
Ripple Voltage (Main Out):
0.0265125 Vrms
Screening Level:
CSA/EN/IEC/UL 60601-1; CSA/UL 62368-1
Seated Height-Max:
10.7 mm
Surface Mount:
NO
Technology:
HYBRID
Terminal Finish:
Tin (Sn)
Terminal Form:
PIN/PEG
Terminal Position:
DUAL
Time@Peak Reflow Temperature-Max (s):
5
Total Power Output-Max:
20 W
Trim/Adjustable Output:
YES
Warm-up Time:
0.01 s
Width:
25.4 mm
REM20-2415SW Frequently Asked Questions (FAQs)
RECOM Power Inc recommends a PCB layout with a large copper area for heat dissipation, and a thermal management system with a heat sink and thermal interface material to keep the junction temperature below 100°C.
To ensure EMC, RECOM Power Inc recommends following the layout and grounding guidelines in the datasheet, using a metal enclosure, and adding EMI filters and shielding as necessary.
The derating curve for the REM20-2415SW is typically provided in the datasheet or can be obtained from RECOM Power Inc directly. It shows the reduction in output power as a function of temperature, and is typically around 1.5% per °C above 50°C.
The REM20-2415SW is designed to meet the requirements of IEC 60068-2-6 (vibration) and IEC 60068-2-27 (shock), but it's recommended to consult with RECOM Power Inc for specific guidance on using the module in extreme environmental conditions.
The MTBF and FIT rates for the REM20-2415SW are typically provided in the datasheet or can be obtained from RECOM Power Inc directly. They are usually calculated according to MIL-HDBK-217F or SN29500 standards.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
REM20-2415SW Overview
Use the download button to access the REM20-2415SW 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like REM20,
or try a keyword search, such as Power Supply Modules
