ROHM recommends a 4-layer PCB with a solid ground plane, and a microstrip line layout with a 50Ω impedance. The device should be placed near the edge of the board to minimize signal loss.
The device requires a bias voltage of 2.7V to 5.5V, and a bias current of 10mA to 20mA. A voltage regulator or a bias tee can be used to provide a stable bias voltage.
The device can handle up to 33dBm (2W) of input power, but it's recommended to operate at a maximum of 25dBm (0.3W) to ensure reliable operation and minimize the risk of damage.
Check the PCB layout and ensure it meets the recommended layout guidelines. Verify the bias voltage and current are within the specified range. Use a spectrum analyzer to measure the input and output signals, and check for any signs of oscillation or instability.
The device is rated for operation up to 85°C, but it's recommended to derate the power handling capability at higher temperatures. Consult the datasheet and ROHM's application notes for more information on high-temperature operation.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
RF1001T2DNZC9 Overview
Use the download button to access the RF1001T2DNZC9 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like RF100,
or try a keyword search, such as Rectifier Diodes
