ROHM recommends a 4-layer PCB with a solid ground plane, and a microstrip line design for the RF signal path. A detailed layout guide can be found in the ROHM application note AP144.
The RFN20TF6SC9 requires a bias voltage of 2.7V to 5.5V. Ensure the bias voltage is stable and noise-free, and that the device is operated within the recommended operating conditions. A voltage regulator or a low-dropout regulator (LDO) can be used to provide a stable bias voltage.
The RFN20TF6SC9 can handle a maximum input power of 33 dBm (2W). Exceeding this power limit may cause damage to the device or affect its performance.
The RFN20TF6SC9 has an input impedance of 50 ohms. To ensure optimal performance, impedance matching networks can be used to match the device's input impedance to the system's impedance. ROHM provides a matching circuit example in the datasheet.
The RFN20TF6SC9 operates over a temperature range of -40°C to +85°C. However, the device's performance may vary depending on the operating temperature. Ensure the device is operated within the recommended temperature range for optimal performance.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
RFN20TF6SC9 Overview
Use the download button to access the RFN20TF6SC9 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like RFN20,
or try a keyword search, such as Rectifier Diodes