RECOM recommends a PCB layout with a large copper area connected to the module's thermal pad to ensure good heat dissipation. A minimum of 2 oz copper thickness is recommended, and the copper area should be connected to a heat sink or a metal plate for further heat dissipation.
To ensure reliability in high-temperature environments, RECOM recommends following the derating curves provided in the datasheet, using a suitable heat sink, and ensuring good airflow around the module. Additionally, the module should be operated within the specified temperature range and with a suitable input voltage to prevent overheating.
RECOM recommends using a low-ESR ceramic capacitor with a value of 10uF to 22uF, rated for the input voltage range, as close as possible to the module's input pins. This helps to filter out input noise and ensure stable operation.
Yes, the RH-2409D/HP can be used in a redundant or parallel configuration, but RECOM recommends consulting with their application engineers to ensure proper design and implementation. This may require additional components and careful consideration of the system's overall architecture.
The typical start-up time for the RH-2409D/HP is around 10ms to 20ms, depending on the input voltage and output load. However, this time can vary depending on the specific application and system design.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
RH-2409D/HP Overview
Use the download button to access the RH-2409D/HP 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like RH-24,
or try a keyword search, such as Power Supply Modules
