RHS2R0E - Ohmite

RHS2R0E Frequently Asked Questions (FAQs)

• What is the thermal resistance of the RHS2R0E?
  The thermal resistance of the RHS2R0E is not explicitly stated in the datasheet, but according to Ohmite's application notes, the thermal resistance (RθJA) is approximately 10°C/W for this specific model.
• Can I use the RHS2R0E in high-frequency applications?
  While the RHS2R0E is primarily designed for low-frequency applications, it can be used in high-frequency applications up to 100 kHz with some caution. However, the inductance and capacitance of the resistor may affect its performance at higher frequencies, and additional filtering or decoupling may be necessary.
• Is the RHS2R0E suitable for high-vibration environments?
  The RHS2R0E is designed to withstand moderate vibration levels, but it's not specifically rated for high-vibration environments. If your application involves extreme vibration, you may need to consider additional mechanical support or a more ruggedized resistor design.
• Can I use the RHS2R0E in humid or wet environments?
  The RHS2R0E has a moisture sensitivity level (MSL) of 1, which means it's suitable for use in humid environments, but not in wet or submerged conditions. If your application involves exposure to moisture, ensure proper sealing and protection to prevent water ingress.
• What is the recommended soldering temperature and time for the RHS2R0E?
  Ohmite recommends soldering the RHS2R0E at a temperature of 260°C (500°F) for 3-5 seconds, with a maximum peak temperature of 280°C (536°F). Exceeding these temperatures or times may damage the resistor or its terminations.