RECOM recommends using a low-ESR ceramic capacitor (e.g., 10uF, X7R, 50V) in parallel with a 10uF, 50V electrolytic capacitor to ensure stable input voltage and reduce ripple.
To ensure reliable start-up and operation, RECOM recommends adding a 1uF, 50V ceramic capacitor in parallel with the input pins to filter out high-frequency noise and reduce the risk of start-up issues.
The maximum allowed output capacitance is 47uF. Exceeding this value may cause instability or oscillation in the converter. It's essential to follow the recommended output capacitor configuration to ensure stable operation.
While the RK-0515S/H6 is rated for operation up to 85°C, RECOM recommends derating the output power by 2.5% per degree above 60°C to ensure reliable operation and prevent overheating.
The RK-0515S/H6 has an enable pin that can be used for remote on/off control. Connect the enable pin to a logic-level signal (e.g., 3.3V or 5V) to turn the converter on or off. Ensure the signal is properly filtered and decoupled to prevent noise-induced errors.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
RK-0515S/H6 Overview
Use the download button to access the RK-0515S/H6 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like RK-05,
or try a keyword search, such as Power Supply Modules
