RECOM recommends a PCB layout with a large copper area connected to the module's thermal pad to ensure good heat dissipation. A minimum of 2 oz copper thickness is recommended, and the copper area should be connected to a heat sink or a metal plate for further heat dissipation.
Use a suitable input voltage regulator or a voltage stabilizer to ensure the input voltage stays within the recommended range of 10.5V to 15.5V. Additionally, consider using a voltage supervisor or a reset IC to monitor the input voltage and reset the system if it goes out of range.
The RK-1515S can drive a maximum capacitive load of 10,000uF. However, it's recommended to derate the capacitive load to 5,000uF to ensure stable operation and to prevent oscillations.
Use a suitable input filter or a transient voltage suppressor (TVS) to protect the module from input voltage transients and surges. Additionally, consider using a fuse or a current limiter to protect the module from overcurrent conditions.
The recommended soldering temperature for the RK-1515S is 260°C to 280°C, and the recommended soldering time is 3 to 5 seconds. It's essential to follow the recommended soldering profile to prevent damage to the module.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
RK-1515S Overview
Use the download button to access the RK-1515S 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like RK-15,
or try a keyword search, such as Power Supply Modules
