Toshiba recommends a 4-layer PCB with a solid ground plane and a separate power plane for the input and output. The input and output capacitors should be placed as close as possible to the IC, and the feedback resistors should be placed close to the output pin.
To ensure stability, it's essential to follow the recommended PCB layout, use a sufficient output capacitor (at least 10uF), and ensure that the feedback resistors are properly sized. Additionally, the input voltage should be well-regulated, and the output should not be overloaded.
The RN1115MFV(TPL3) is rated for operation up to 85°C ambient temperature. However, it's recommended to derate the output current and voltage according to the temperature derating curve provided in the datasheet to ensure reliable operation.
Yes, the RN1115MFV(TPL3) is designed to withstand high-vibration environments. However, it's essential to ensure that the PCB is properly secured and that the components are properly soldered to prevent mechanical stress on the IC.
To protect the regulator from input voltage surges and spikes, it's recommended to add a TVS (Transient Voltage Suppressor) diode or a varistor at the input of the regulator. This will help to clamp the input voltage and prevent damage to the IC.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
RN1115MFV(TPL3) Overview
Use the download button to access the RN1115MFV(TPL3) schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like RN111,
or try a keyword search, such as Small Signal Bipolar Transistors
