RN112-1.5-02 footprint, schematic symbol and 3D model by Schaffner

Symbol

PCB Footprints

3D Models

RN112-1.5-02 Details

Schaffner recommends a symmetrical layout with the filter's input and output stages separated by a ground plane to minimize electromagnetic interference (EMI). A minimum of 1mm clearance around the filter is also recommended.
While the RN112-1.5-02 is rated for operation up to 85°C, it's essential to consider derating the filter's current rating for extended high-temperature operation. Consult Schaffner's application notes for specific guidance.
The RN112-1.5-02 is designed to attenuate high-frequency noise and transients. Its differential mode inductance and common mode capacitors work together to filter out noise and transients, ensuring a clean power supply to the load.
Yes, the RN112-1.5-02 is designed to meet the requirements of IEC 60939-2 and UL 1283 for safety-critical applications. However, it's essential to consult Schaffner's documentation and relevant industry standards to ensure compliance with specific application requirements.
Yes, the RN112-1.5-02 can be used in parallel to increase current handling. However, it's crucial to ensure that the filters are properly synchronized and that the total current rating is not exceeded. Consult Schaffner's application notes for guidance on parallel operation.

Expert Contribution

System Verified

Community Approved

Use the download button to access the RN112-1.5-02 schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like RN112, or try a keyword search, such as Fixed Inductors

If you searched for RN112-1.5-02, you might also be interested in these parts:

Showing 0 results


Please enter a minimum 3 letters or numbers
← Prev Next →