Toshiba recommends a 4-layer PCB with a solid ground plane, and to keep the input and output traces as short as possible. Additionally, it's recommended to use a common mode choke and a ferrite bead to reduce EMI.
Ensure good airflow around the device, and consider using a heat sink if the device is expected to operate in high-temperature environments. Also, follow the recommended thermal design guidelines in the datasheet.
The maximum allowed voltage deviation is ±10% of the nominal input voltage. Exceeding this limit may affect the device's performance and reliability.
Yes, the RN1705,LF can be used in a redundant power supply configuration. However, ensure that the devices are properly synchronized and that the output voltages are matched to prevent any potential issues.
Check the input voltage, output load, and ambient temperature. Verify that the device is properly soldered and that the PCB layout meets the recommended guidelines. Use an oscilloscope to monitor the output voltage and current. If issues persist, contact Toshiba's technical support for further assistance.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
RN1705,LF Overview
Use the download button to access the RN1705,LF schematic symbol and PCB footprint.
To find more CAD model downloads similar to this part, try a partial part number search, like RN170,
or try a keyword search, such as Small Signal Bipolar Transistors
