RECOM recommends a PCB layout with a large copper area for heat dissipation, and a thermal management system with a heat sink and thermal interface material to keep the junction temperature below 100°C.
The ROL-0505S/HP is certified to UL60950-1, EN60950-1, and IEC60950-1 safety standards. Ensure that the converter is used within the specified operating conditions and follow the recommended layout and thermal management guidelines to maintain compliance.
RECOM recommends using a low-ESR ceramic capacitor with a value of 10-22uF, depending on the input voltage and operating conditions, to ensure stable operation and minimize input ripple.
Use an oscilloscope to monitor the input and output voltages, and check for any signs of oscillation or instability. Verify that the input voltage is within the specified range, and that the output load is within the recommended range. Consult the datasheet and application notes for troubleshooting guidelines.
The maximum allowed output capacitance is 47uF. Exceeding this value may cause instability or oscillation. Consult the datasheet and application notes for more information on output capacitance and stability.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
ROL-0505S/HP Overview
Use the download button to access the ROL-0505S/HP 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like ROL-0,
or try a keyword search, such as Power Supply Modules
