ADDITIONAL -15 VOLT OUTPUT ALSO AVAILABLE; SEATED HGT-NOM
Analog IC - Other Type:
DC-DC REGULATED POWER SUPPLY MODULE
Approvals:
EN; UL
Control Mode:
VOLTAGE-MODE
Efficiency (Main Output):
85%
Input Voltage-Max:
18 V
Input Voltage-Min:
9 V
Input Voltage-Nom:
12 V
JESD-30 Code:
R-XDMA-P9
Length:
31.8 mm
Line Regulation-Max:
0.2%
Load Regulation-Max:
1%
Number of Functions:
1
Number of Outputs:
2
Number of Terminals:
9
Operating Temperature-Max:
100 °C
Operating Temperature-Min:
-40 °C
Output Voltage-Max:
15.15 V
Output Voltage-Min:
14.85 V
Output Voltage-Nom:
15 V
Package Body Material:
UNSPECIFIED
Package Code:
DMA
Package Shape:
RECTANGULAR
Package Style:
MICROELECTRONIC ASSEMBLY
Peak Reflow Temperature (Cel):
255
Protections:
SHORT CIRCUIT; OVER CURRENT
Qualification Status:
Not Qualified
Ripple Voltage (Main Out):
0.017675 Vrms
Seated Height-Max:
10.7 mm
Surface Mount:
NO
Technology:
HYBRID
Temperature Grade:
INDUSTRIAL
Terminal Form:
PIN/PEG
Terminal Pitch:
2.54 mm
Terminal Position:
DUAL
Time@Peak Reflow Temperature-Max (s):
5
Total Power Output-Max:
8 W
Trim/Adjustable Output:
NO
Width:
20.3 mm
RP08-1215DA Frequently Asked Questions (FAQs)
RECOM recommends a PCB layout with a large copper area connected to the module's thermal pad to ensure good heat dissipation. A minimum of 2 oz copper thickness is recommended, and the copper area should be connected to a heat sink or a metal plate for further heat dissipation.
Yes, the RP08-1215DA is designed to withstand vibrations up to 10G peak acceleration, making it suitable for use in high-vibration environments. However, it's essential to ensure proper mounting and screw torque to prevent damage or disconnection.
To ensure reliability in high-temperature applications, it's crucial to maintain a maximum ambient temperature of 80°C and ensure good airflow around the module. Additionally, derating the output power according to the temperature derating curve in the datasheet can help prevent overheating.
RECOM recommends using a low-ESR ceramic capacitor with a value of 10-22 μF, X7R or X5R dielectric, and a voltage rating of 50V or higher. This helps to filter input noise and ensure stable operation.
Yes, the RP08-1215DA can be used in a redundant or parallel configuration to achieve higher output power or redundancy. However, it's essential to ensure proper synchronization and ORing diode configuration to prevent damage or instability.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
RP08-1215DA Overview
Use the download button to access the RP08-1215DA 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like RP08-,
or try a keyword search, such as Power Supply Modules
