OVER CURRENT; OVER VOLTAGE; SHORT CIRCUIT; THERMAL
Ripple Voltage (Main Out):
0.017675 Vrms
Screening Level:
EN 50155
Seated Height-Max:
10.7 mm
Surface Mount:
NO
Technology:
HYBRID
Terminal Finish:
Tin (Sn)
Terminal Form:
PIN/PEG
Terminal Position:
DUAL
Total Power Output-Max:
30 W
Trim/Adjustable Output:
NO
Warm-up Time:
0.008 s
Width:
25.4 mm
RPA20-2415DAW/P Frequently Asked Questions (FAQs)
RECOM Power Inc recommends a PCB layout with a large copper area connected to the module's thermal pad to ensure good heat dissipation. A minimum of 2 oz copper thickness is recommended, and the copper area should be connected to a heat sink or a metal plate for further heat dissipation.
Yes, the RPA20-2415DAW/P is designed to withstand vibrations up to 10G peak acceleration, making it suitable for use in industrial and transportation applications. However, it's recommended to follow proper mounting and screwing procedures to ensure the module is securely fastened to the PCB or chassis.
To ensure EMC, RECOM Power Inc recommends following proper PCB layout and design guidelines, such as keeping sensitive analog circuits away from the DC-DC converter, using a common-mode choke, and adding EMI filters if necessary. Additionally, the module's metal case should be connected to the system's chassis ground to reduce radiated emissions.
The maximum allowable capacitance on the output of the RPA20-2415DAW/P is 2200uF. Exceeding this value may cause instability or oscillation in the output voltage. It's recommended to follow the recommended output capacitance values specified in the datasheet to ensure stable operation.
Yes, the RPA20-2415DAW/P can be used in a redundant or parallel configuration to achieve higher power ratings or to provide redundancy in critical applications. However, it's recommended to follow proper design and layout guidelines to ensure proper operation and to prevent any potential issues with synchronization or current sharing.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
RPA20-2415DAW/P Overview
Use the download button to access the RPA20-2415DAW/P 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like RPA20,
or try a keyword search, such as Power Supply Modules
