RECOM Power Inc recommends a PCB layout with a large copper area connected to the module's thermal pad to ensure good heat dissipation. A minimum of 2 oz copper thickness is recommended, and the copper area should be connected to a heat sink or a metal plate for further heat dissipation.
Yes, the RPP40-2405SW is designed to withstand high vibrations. However, it's recommended to follow the recommended PCB layout and mounting guidelines to ensure the module is securely attached to the PCB. Additionally, the module's connectors should be securely fastened to prevent damage.
The maximum allowed capacitance for the output filter is 47uF. Exceeding this value may cause instability or oscillation in the output voltage. It's recommended to use a capacitor with a low ESR (Equivalent Series Resistance) to minimize the risk of oscillation.
Yes, the RPP40-2405SW can be used in a redundant configuration. However, it's recommended to use a diode or a switch to isolate the modules from each other to prevent back-feeding and ensure reliable operation.
The recommended input fuse rating is 5A slow-blow. This will provide protection against input overcurrent and ensure the module is not damaged in case of an input fault.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
RPP40-2405SW Overview
Use the download button to access the RPP40-2405SW 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like RPP40,
or try a keyword search, such as Power Supply Modules
