ROHM recommends a thermal pad size of at least 2.5mm x 2.5mm, with multiple vias to the ground plane to ensure efficient heat dissipation. A minimum of 3mm clearance around the device is also recommended to prevent thermal interference.
To ensure stable operation, ROHM recommends a soft-start circuit to limit inrush current during power-up. Additionally, a capacitor with a low ESR (Equivalent Series Resistance) should be used to filter the input voltage. During power-down, a slow decay of the input voltage is recommended to prevent voltage spikes.
While the datasheet specifies a recommended input voltage range, ROHM recommends limiting voltage deviations to ±10% of the nominal input voltage to ensure stable operation and prevent damage to the device.
ROHM recommends implementing ESD protection measures, such as TVS diodes or ESD protection arrays, on the input and output pins to prevent damage from electrostatic discharge. Additionally, handling the device with ESD-safe equipment and following proper handling procedures is essential.
While the datasheet specifies an operating temperature range of -40°C to 105°C, ROHM recommends operating the device within a range of -20°C to 85°C for long-term reliability and to prevent thermal stress.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
RQ5E025SPTL Overview
Use the download button to access the RQ5E025SPTL schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like RQ5E0,
or try a keyword search, such as Small Signal Field-Effect Transistors
