A thermal pad is recommended under the IC to improve heat dissipation. A minimum of 2oz copper thickness and a thermal relief pattern are also recommended.
Ensure that the input voltage is within the recommended range, and that the output capacitor is of sufficient value (at least 10uF) and ESR (less than 1 ohm) to maintain stability.
The maximum allowable ripple voltage on the input is 10% of the nominal input voltage to ensure stable operation.
While ceramic capacitors can be used, they may not provide sufficient ESR to ensure stability. A tantalum or electrolytic capacitor is recommended for the output capacitor.
Use an external current sense resistor and a comparator or a dedicated overcurrent protection IC to detect and respond to overcurrent conditions.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
RQ6E050ATTCR Overview
Use the download button to access the RQ6E050ATTCR schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like RQ6E0,
or try a keyword search, such as Small Signal Field-Effect Transistors
