ROHM recommends a PCB layout with a thermal pad connected to a large copper area on the bottom layer, and multiple vias to dissipate heat efficiently. A minimum of 2oz copper thickness is recommended.
To ensure reliable operation, ROHM recommends derating the power dissipation according to the temperature derating curve in the datasheet. Additionally, ensure good thermal design, and consider using a heat sink or thermal interface material if necessary.
The maximum allowable voltage for the RRL025P03FRATR is 30V, although the recommended operating voltage is 25V. Exceeding 30V may cause permanent damage to the device.
While the RRL025P03FRATR is suitable for high-frequency switching, ROHM recommends evaluating the device's performance in the specific application, considering factors like switching frequency, voltage, and current. Additional components, such as snubbers or filters, may be necessary to ensure reliable operation.
ROHM recommends storing the RRL025P03FRATR in a dry, cool place, away from direct sunlight and moisture. The storage temperature should be between -20°C and 40°C, and the humidity should be below 60%.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
RRL025P03FRATR Overview
Use the download button to access the RRL025P03FRATR schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like RRL02,
or try a keyword search, such as Small Signal Field-Effect Transistors
