TDK-Lambda recommends a multi-layer PCB with a solid ground plane and thermal vias to dissipate heat. A minimum of 2oz copper thickness is recommended. Ensure good airflow around the module and consider adding a heat sink or thermal interface material if operating in high-temperature environments.
Follow TDK-Lambda's guidelines for EMC compliance, including using a metal enclosure, proper cable shielding, and filtering. Ensure the module is installed at least 10mm away from other components and consider adding additional filtering or shielding if necessary.
TDK-Lambda provides a derating curve in the datasheet, but for more detailed information, contact TDK-Lambda's technical support. They can provide a customized derating curve based on your specific application and environmental conditions.
Yes, the RSEL-20R5AL can be used in redundant or parallel configurations, but ensure proper synchronization and control of the modules to avoid instability or damage. Consult TDK-Lambda's application notes and technical support for guidance on implementing these configurations.
TDK-Lambda recommends using low-ESR capacitors with a minimum capacitance of 10uF for the input and 22uF for the output. The capacitor selection should be based on the specific application requirements and operating conditions.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
RSEL-20R5AL Overview
Use the download button to access the RSEL-20R5AL 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like RSEL-,
or try a keyword search, such as Mains Filters
