A recommended PCB layout for optimal thermal performance would be to have a large copper area on the bottom layer connected to the thermal pad, and to use thermal vias to dissipate heat. A minimum of 2oz copper thickness is recommended.
To ensure proper soldering, use a soldering iron with a temperature of 350°C to 370°C, and apply a small amount of solder paste to the pads. Use a soldering technique that minimizes the time the iron is in contact with the device.
The maximum allowed voltage on the gate pin is ±20V, but it's recommended to keep it within ±15V to ensure reliable operation.
To protect the device from ESD, handle the device by the body or use an anti-static wrist strap, and store the device in an anti-static bag or container. Ensure the PCB has ESD protection components, such as TVS diodes or ESD arrays.
The recommended operating frequency range for the RSJ250P10TL is up to 100 kHz, but it can be used up to 1 MHz with proper PCB design and layout considerations.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
RSJ250P10TL Overview
Use the download button to access the RSJ250P10TL schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like RSJ25,
or try a keyword search, such as Power Field-Effect Transistors
