RECOM recommends a PCB layout with a large copper area connected to the module's thermal pad to ensure good heat dissipation. A minimum of 2 oz copper thickness is recommended, and the copper area should be connected to a heat sink or a metal plate for further heat dissipation.
Use a suitable input voltage regulator or a voltage stabilizer to ensure the input voltage stays within the recommended range of 36-75V. Additionally, consider using a voltage supervisor or a voltage monitor to detect any input voltage deviations.
The maximum allowed capacitance on the output is 2200uF. Exceeding this value may cause instability or oscillations in the output voltage. It's recommended to use a capacitance value that is as close to the recommended value as possible.
The RSO-2415S is rated for operation up to 80°C ambient temperature. However, derating is required for temperatures above 60°C. Consult the datasheet for derating curves and ensure proper heat dissipation to prevent overheating.
Follow proper PCB layout and design guidelines to minimize electromagnetic interference (EMI). Use a metal enclosure or a shielded case to contain EMI. Additionally, ensure that the module is properly grounded and use EMI filters or common-mode chokes as needed.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
RSO-2415S Overview
Use the download button to access the RSO-2415S 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like RSO-2,
or try a keyword search, such as Power Supply Modules
