Part Image

RT6213BHGJ6F - RICHTEK

Description: IC REG BUCK ADJ 3A TSOT23-6

Download RT6213BHGJ6F Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
RT6213BHGJ6F - RICHTEK PCB footprint - SOT23 (6-Pin) - SOT23 (6-Pin) - TSOT-23-6 (FC
click to zoom
3D Models
RT6213BHGJ6F - RICHTEK  - 3D model - SOT23 (6-Pin) - TSOT-23-6 (FC
click to zoom

RT6213BHGJ6F Details

  • Manufacturer Part Number:

    RT6213BHGJ6F

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    TSOT-26(FC)

  • Package Description:

    TSOT-23, 6 PIN

  • Manufacturer Package Code:

    TSOT-26(FC)

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.60

  • Manufacturer:

    Richtek Technology Corp

  • YTEOL:

    7.7

  • Analog IC - Other Type:

    SWITCHING REGULATOR

  • Control Technique:

    PULSE WIDTH MODULATION

  • Input Voltage-Max:

    18 V

  • Input Voltage-Min:

    4.5 V

  • Input Voltage-Nom:

    12 V

  • JESD-30 Code:

    R-PDSO-G6

  • Length:

    2.8955 mm

  • Number of Functions:

    1

  • Number of Terminals:

    6

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Output Current-Max:

    3 A

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    VSSOP

  • Package Equivalence Code:

    TSOP6,.11,37

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH

  • Seated Height-Max:

    1 mm

  • Surface Mount:

    YES

  • Switcher Configuration:

    BUCK

  • Switching Frequency-Max:

    500 kHz

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    0.95 mm

  • Terminal Position:

    DUAL

  • Width:

    1.6 mm

RT6213BHGJ6F Frequently Asked Questions (FAQs)

  • Richtek provides a recommended PCB layout in the datasheet, but it's essential to follow good PCB design practices, such as keeping the input and output capacitors close to the IC, using a solid ground plane, and minimizing trace lengths and widths to reduce EMI and noise.
  • Choose input capacitors with low ESR and high ripple current ratings. For output capacitors, select ones with low ESR, high capacitance, and a voltage rating that meets or exceeds the output voltage. Refer to the datasheet for specific recommendations and calculations.
  • The RT6213BHGJ6F is rated for operation up to 85°C ambient temperature, but derating may be necessary for high-power applications or extreme environmental conditions. Consult the datasheet for thermal derating curves and guidelines.
  • Follow the datasheet's guidelines for component selection, PCB layout, and compensation network design. Additionally, ensure that the input and output capacitors are properly sized, and the feedback network is correctly configured to maintain stability.
  • The soft-start pin (SS) should be connected to a capacitor to ground, with a recommended value of 10nF to 100nF. The enable pin (EN) should be connected to a logic signal or a pull-up resistor to ensure proper operation. Consult the datasheet for specific guidelines and timing diagrams.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

RT6213BHGJ6F Overview

Use the download button to access the RT6213BHGJ6F schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like RT621, or try a keyword search, such as Switching Regulator or Controllers

Parts related to RT6213BHGJ6F

Showing 0 results