Schaffner recommends a symmetrical PCB layout with a solid ground plane, and the use of vias to connect the input and output pins to the ground plane. Additionally, the input and output tracks should be kept as short as possible and away from noise sources.
The RT8532-10-4M0 has a thermal pad on the bottom of the device, which should be connected to a heat sink or a metal plate on the PCB. Ensure good thermal contact between the device and the heat sink, and provide adequate airflow around the device.
The RT8532-10-4M0 can withstand surge currents up to 100 A for 1 ms, and 50 A for 10 ms. However, it's recommended to consult Schaffner's application notes for specific guidance on surge current handling.
Yes, the RT8532-10-4M0 can be used in a redundant or parallel configuration, but it's essential to ensure that the devices are properly synchronized and that the system is designed to handle the increased power rating.
Schaffner recommends using a fuse with a rating of 10 A or less, depending on the specific application and system requirements. The fuse should be able to handle the maximum inrush current of the device.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
RT8532-10-4M0 Overview
Use the download button to access the RT8532-10-4M0 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like RT853,
or try a keyword search, such as Mains Filters
