The recommended land pattern for the SDR0503-682JL can be found in the Bourns application note AN204, which provides guidelines for PCB layout and land pattern design.
The SDR0503-682JL has a maximum operating temperature of 125°C. Ensure that the component is mounted on a PCB with a thermal conductivity of at least 1 W/m-K to prevent overheating. Also, consider using thermal vias to dissipate heat.
The recommended soldering profile for the SDR0503-682JL is a peak temperature of 260°C for 10-15 seconds, with a ramp-up rate of 3°C/s and a ramp-down rate of 6°C/s. Refer to the Bourns application note AN205 for more details.
To ensure reliability in high-vibration environments, ensure that the SDR0503-682JL is properly secured to the PCB using a suitable adhesive or mechanical fastening method. Also, consider using a conformal coating to protect the component from environmental factors.
The ESR of the SDR0503-682JL is not explicitly stated in the datasheet. However, according to Bourns' technical support, the ESR is typically around 0.5 ohms. For more accurate information, contact Bourns' technical support directly.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
SDR0503-682JL Overview
Use the download button to access the SDR0503-682JL 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like SDR05,
or try a keyword search, such as Fixed Inductors
