The recommended PCB layout and land pattern for the SE2623L-R can be found in the Skyworks Solutions application note AN302A, which provides detailed guidelines for optimal performance and thermal management.
The SE2623L-R requires a bias voltage of 3.3V to 5V, and the recommended bias current is 10mA to 20mA. Ensure the bias voltage is stable and noise-free, and use a suitable bias resistor to prevent over-biasing.
The SE2623L-R can handle up to 2W of continuous power, but it's recommended to derate the power handling to 1.5W for optimal reliability and thermal performance.
Common issues like low gain or high noise floor can be caused by improper biasing, poor PCB layout, or inadequate thermal management. Check the bias voltage, PCB layout, and thermal management, and ensure the device is properly soldered and connected.
Yes, the SE2623L-R is a sensitive device and requires proper ESD precautions during handling and assembly. Use an ESD wrist strap, mat, or workstation, and ensure the device is stored in an anti-static bag or container.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
SE2623L-R Overview
Use the download button to access the SE2623L-R schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like SE262,
or try a keyword search, such as RF/Microwave Amplifiers
