3D Models
Note! To download footprints and symbols, use the build and request forms below
Request (48 hours)
- Datasheet Download Datasheet
- Stock & Prices $ Price & Stock for SET111419
- Part Number SET111419
- Manufacturer SEMTECH
- Pin Count 100
- Part Category Integrated Circuit
- Last Modified Date Jul 16, 2024 9:07 AM UTC
- Pinout / Pin List Click Here (Member Only)
SET111419 Details
-
Manufacturer Part Number:
SET111419
-
Part Life Cycle Code:
Transferred
-
Country Of Origin:
Mexico
-
ECCN Code:
EAR99
-
HTS Code:
8541.10.00.80
-
Manufacturer:
Semtech Corporation
-
YTEOL:
7.05
-
Configuration:
BRIDGE, 6 ELEMENTS
-
Diode Element Material:
SILICON
-
Diode Type:
BRIDGE RECTIFIER DIODE
-
Forward Voltage-Max (VF):
2.2 V
SET111419 Frequently Asked Questions (FAQs)
-
A good PCB layout for the SET111419 involves keeping the input and output traces short and symmetrical, using a solid ground plane, and placing decoupling capacitors close to the device. A 4-layer PCB with a dedicated power plane and a separate ground plane is recommended.
-
To ensure proper biasing, make sure to follow the recommended voltage supply and current requirements. The device requires a single 3.3V or 5V power supply, and the input voltage should be within the specified range. Additionally, ensure that the input and output impedance are matched to minimize signal reflections.
-
The SET111419 is capable of supporting data rates up to 10 Gbps, but the actual data rate achieved depends on the specific application, PCB layout, and signal quality. In general, the device can support data rates up to 8 Gbps with minimal signal degradation.
-
To troubleshoot issues with the SET111419, use a combination of tools such as oscilloscopes, signal generators, and logic analyzers to analyze the signal quality and integrity. Check for signal reflections, jitter, and noise, and ensure that the device is properly biased and terminated. Also, review the PCB layout and ensure that it meets the recommended guidelines.
-
The SET111419 is designed to be compatible with other Semtech devices, such as the SX9310 and SX9311, as well as third-party components. However, ensure that the specific components used are compatible with the SET111419's voltage and current requirements, and that the PCB layout is designed to accommodate the specific components used.
Trust Checks
Trust Score Unavailable
SET111419 Overview
Use the download button to access the SET111419 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like SET11,
or try a keyword search, such as Bridge Rectifier Diodes
