The recommended PCB footprint for the SFR16S0002004FR500 is a rectangular pad with dimensions of 4.5 mm x 2.5 mm, with a 1.5 mm x 1.5 mm thermal pad in the center. The pad should have a solder mask defined (SMD) and a non-solder mask defined (NSMD) area around the thermal pad.
To ensure reliable soldering, use a soldering iron with a temperature range of 250°C to 260°C, and a solder with a melting point of 217°C to 220°C. Apply a small amount of solder paste to the PCB pads, and use a reflow oven or a hot air gun to solder the component. Avoid using excessive solder or flux, as it can cause bridging or shorts.
The maximum operating temperature range for the SFR16S0002004FR500 is -55°C to 150°C. However, the component's performance and reliability may degrade if operated at temperatures above 125°C for extended periods.
Yes, the SFR16S0002004FR500 is designed to withstand vibrations up to 10 g (rms) from 10 Hz to 2 kHz. However, it's essential to ensure that the PCB is properly secured and the component is properly soldered to prevent mechanical stress and damage.
The SFR16S0002004FR500 has an internal ESD protection diode, but it's still recommended to follow proper ESD handling procedures when handling the component. Use an ESD wrist strap or mat, and ensure that the PCB and component are properly grounded during assembly and testing.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
SFR16S0002004FR500 Overview
Use the download button to access the SFR16S0002004FR500 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like SFR16,
or try a keyword search, such as Metal Film Resistors
